Charging-port circuits
Board-level charging faults that a port swap alone won't fix.
Microsoldering · Midland, MI
Microsoldering in Midland, Michigan.
Board-level repair at our Midland store: fine, component-level soldering for charging circuits, failed chips, and no-power faults on phones, tablets, and computer boards. Diagnosed in-house, quoted before any work begins.
Component
level
Walk-in
Midland store
Straight answer first
What microsoldering in Midland does Computers To Go do?
Computers To Go does component-level microsoldering at its Midland store on phones, tablets, and computer boards. The common jobs are charging-port circuits that a port swap alone will not fix, replacing failed chips and components, tracing no-power faults on devices that will not turn on, backlight and display circuit repair, and board repair that can make a dead device readable again for data recovery.
Component replacement
Replacing failed chips and components with fine soldering.
No-power diagnosis
Tracing board-level faults on devices that won't turn on.
Data-recovery assist
Board repair that can make a dead device readable again.
Backlight & display circuits
Fixing board-level display and backlight faults.
Honest expectations
We'll tell you when a repair is worthwhile — and when it isn't.
Local shop
Where can I get microsoldering in Midland?
Computers To Go does microsoldering in Midland at its walk-in store, in-house rather than sending the work away; the address, phone, and hours are in the store section below. You can bring the device to the Midland counter, talk through the fault with the technician who will work on it, and get an honest answer about whether board-level repair makes sense before anything is attempted. Nearby customers from Auburn, Sanford, Freeland, Bay City, Coleman, and Hope use the same Midland store.
Charging circuits
Failed chips
No-power boards
Backlight faults
Display circuits
Lifted pads
Component replacement
Data-recovery assist
Phone boards
Tablet boards
Computer boards
Free board diagnosis
Worth it or not
When is board-level repair in Midland worth attempting?
Board-level repair in Midland is worth attempting when the fault lives on the circuit board itself rather than in a part you can swap, which Computers To Go confirms with a free board diagnosis first. A lifted pad, a failed chip, or a bad charging circuit on an otherwise healthy board is a repair. If the board is beyond saving, the Midland technician says so instead of selling an attempt.
- 01
Bring it to the Midland store
Drop the device at the Midland counter or describe the fault through the repair form first.
- 02
Free board diagnosis
The board is inspected and the fault traced at the component level.
- 03
Honest assessment
You hear whether a microsoldering repair is worthwhile, and when it isn't.
- 04
Clear quote
A plain price for the board-level work, before any soldering begins.
- 05
Your approval
Nothing proceeds until you say go.
- 06
Repair & test
The component-level fix is completed and the device is verified.
Microsoldering
Specialist work, done in Midland
Repairing the faults most shops send away
Charging circuits, failed chips, no-power boards: diagnosed under magnification and repaired at the component level at our Midland store, so your device and often your data stay close to home.
Charging circuits Chip-level Data-recovery assist
Free Board Diagnosis
Data
Can microsoldering recover data from a dead phone in Midland?
Computers To Go in Midland can sometimes recover data from a dead phone through microsoldering, when the fault is on the board rather than the storage itself. A board-level repair may bring the device back long enough to retrieve photos and files. Success depends on the specific damage, so the Midland technician assesses the board first and explains the odds honestly before any work is quoted.
Intake
What happens when I bring a device to the Midland store?
Computers To Go starts every microsoldering job at the Midland store with a free board diagnosis, then a clear quote you approve before any soldering begins. Tell the counter what the device is doing, whether another shop already opened it, and whether the data on it matters. The table below shows what to bring and what happens next.
| Step | What to bring or tell us | What Computers To Go does |
|---|---|---|
| Drop-off | The device, plus its charger or cable if the fault involves charging or power | Logs the device at the Midland counter and notes the symptoms |
| Fault description | What the device does: no power, no charge, no display or backlight, or a prior repair that did not hold | Decides whether the fault is likely board-level or a swappable part |
| Repair history | Whether another shop has already opened or worked on the device | Checks for lifted pads or damage from earlier work before quoting |
| Data | Whether the photos and files on the device matter to you | Prioritizes a repair path that protects the chance of data recovery |
| Diagnosis | Nothing further; the board diagnosis is free | Inspects the board, traces the fault, and gives an honest worthwhile-or-not answer |
| Quote and approval | Your go-ahead | Gives a clear quote first; soldering starts only after you approve |
Devices
Which devices can be microsoldered in Midland?
Computers To Go in Midland works at the board level on phones, tablets, and computer boards. Common jobs are charging-port circuits, failed components, no-power faults, and backlight or display circuit repairs. If a parts-swap repair elsewhere stopped at the board, microsoldering in Midland is the next step: the fault is traced and fixed at the component level instead of replacing the whole device.
Before you bring a device to the Midland store
Bring the charger or cable if the problem involves power or charging, note any error or behavior you have seen, and tell the counter if the data on the device matters so the technician can weigh data recovery into the board diagnosis. For your security, never share your account passwords in a form or email; we ask only for what is genuinely needed, and only when it is needed.
Walk-in store
Visit the Midland store
Computers To Go — Midland
1914 S Saginaw Rd, Midland, MI 48640
Phone: (989) 631-6900
Hours: Mon–Fri 11:00 AM – 7:00 PM, Sat 12:00 PM – 5:00 PM, Sun closed
Walk in during store hours or see the Midland store page for directions. Customers from Auburn, Sanford, Freeland, Bay City, Coleman, and Hope use the Midland counter.
Questions
Midland microsoldering FAQ
Do you do microsoldering in Midland, MI?
Yes. Computers To Go performs board-level microsoldering at its Midland store, in-house rather than sending the work away. Phones, tablets, and computer boards with charging-circuit faults, failed components, no-power faults, or backlight and display circuit problems are diagnosed on the bench first, and you get a clear quote for approval before any soldering begins.
Can microsoldering recover data from a dead phone in Midland?
Sometimes. If the fault is on the board rather than the storage itself, a board-level repair at the Midland store can bring the device back long enough to retrieve your data. Computers To Go assesses the board first and tells you honestly whether an attempt is worth making, so you decide with real information instead of guesswork.
Another Midland shop said my device cannot be fixed. Is that final?
Not always. Most repair shops swap whole parts and stop at the board, so a fault that looks terminal to a parts-swapper is often exactly what microsoldering is designed to fix. Computers To Go in Midland inspects the board under magnification and gives a straight answer about whether a component-level repair makes sense before you give up on the device.
How much does microsoldering cost in Midland?
It depends on the fault and the work involved, because board-level repair is skilled, precise work. Computers To Go in Midland offers a free board diagnosis, explains what failed, and gives you a clear quote for approval before any soldering starts. If a repair is not worthwhile, the technician will say so rather than sell you an attempt.
Nearby & related
Explore more
Also serving Saginaw from our other store. Read about microsoldering and board-level repair in general, or see the Midland store page.
“Every job we take on in Midland starts the same way: we diagnose first, give you a clear price, and only start once you approve,” says Zachariah Mularz, owner of Computers To Go.
Further reading: Apple: iPhone repair and service · EPA: electronics donation and recycling
Last updated: October 3, 2026 · Reviewed by Zachariah Mularz, owner, Computers To Go Midland, MI
Told It Can't Be Fixed in Midland?
Bring it to the Midland store for a free board-level diagnosis. The fault may be exactly what microsoldering solves.